SpeedWing's "R/C Flying Hobbies"

Click to Enlarge

Key Features

Ingenious open-structure balsa/light-ply design minimizes weight and maximizes strength
Light wing loading and large control surfaces for astonishing freestyle and 3D capability
90% pre-built and covered in UltraCote
Carbon fiber pushrods
All hardware is included
Out-of-the-box compatibility with E-flite outrunner or inrunner brushless motors
Outrunner Stick Mount included

Overview

The CAP 232 BP 3D combines the sturdy construction of a balsa/light-ply airframe with the uninhibited 3D capability of a lightweight profile park flyer. It’s all made possible by its intelligently engineered, open structure design that keeps weight to a bare minimum while providing all the structural integrity of a real wood airframe. This feather-light construction, combined with a high-output brushless motor, will provide spine-tingling 3D and freestyle performance that will let you really push the limits. And it comes from the factory 90% built and covered in genuine UltraCote® and UltraCote Lite so you can be up and flying in no time.

Specs

Wing Span: 35.5 in (900mm)

Overall Length: 35.5 in (900mm)

Wing Area: 425 sq in (27.5 sq dm)

Flying Weight: 15.5-17 oz (440-480g)

Motor Size: Park 450 or Park 400

Radio: 6 channels (for proper mixing)

Servos: 4 sub-micro

Trim Scheme Colors: UltraCote White (HANU870), Sky Blue (HANU875), Bright Yellow (HANU872), UltraCote Lite Transparent Blue (HANU969), UltraCote Lite Transparent Clear (HANU964)

CG (center of gravity): 4-3/4" (120mm) back measured from the center of the leading edge of the wing next to the fuselage

Prop Size: 11x3.8 Slow Flyer

Hardware Included: Yes

Speed Control : 20A Brushless

Recommended Battery: 11.1V 3-cell 910-1320mAh Li-Po

Control Throw (Ailerons): 1.25" (32mm) with 20% Expo on Low or 1.75" (45mm) with 43% Expo on High Up/Down

Control Throw (Elevator): 2" (50mm) with 20% Expo on Low or 3" (75mm) with 49% Expo on High Up/Down

Control Throw (Rudder): 3" (75mm) Low & High Left/Right

Scale: Park Flyer

Approx. Assembly Time: 3-4 hours

Needed to Complete

6-channel transmitter (for proper mixing and dual rate capabilities)
Micro receiver
4 sub-micro servos
Motor
20A Brushless ESC
11x3.8 Slow Flyer Prop
Battery & Charger