SpeedWing's "R/C Flying Hobbies"

Click to Enlarge

Mini Ultra Stick ARF

Key Features

Perfect transitional airplane for advancing pilots who want to learn aerobatics and for sport flyers who want easy comfortable sport flyer
Design based on Hangar 9’s popular line of Ultra Sticks
Lightweight balsa and ply construction
Covered in genuine Hangar 9 UltraCote
Two firewall options let you use a wide variety of motor sizes, types and brands
Includes molded firewall stick mount
Optional quad-flap configuration
Tough, lightweight aluminum landing gear that’s pre-assembled and tall enough to accommodate larger prop sizes
95% pre-built—get flying in 2 hours or less
Control surfaces have pre-installed hinges and control horns
Bolt-on tail requires no gluing and secures with two lock nuts
Great match for E-flite Park 450 Outrunner Brushless Motor
Easy access top battery hatch

Overview

Based on the popular Hangar 9 Ultra Stick, the E-flite Mini Ultra Stick comes 95% prebuilt from balsa and light-ply and is covered in genuine UltraCote. At the heart of the Mini Ultra Stick’s fun factor are two firewall options that let you use a wide variety of motor sizes, types and brands. This along with the ample clearance for larger props that its tall, lightweight aluminum landing gear provides gives the Mini Ultra Stick huge performance potential. You can push the envelope even further by adding the optional split quad-flaps.

Specs

Wing Span: 38.75 in (985mm)

Overall Length: 34 in (865mm)

Wing Area: 325 sq in (21 sq dm)

Flying Weight: 22 - 25 oz (625 - 710g)

Motor Size: Park 400 Inrunner or Park 450 Outrunner

Radio: 4-channel or greater (7-channel for quad flaps)

Servos: 4 sub-micros (6 sub-micros for quad flaps)

Trim Scheme Colors: UltraCote Fluourescent Blue, Flame Red, Transparent Red & White

CG (center of gravity): 2.25 in (57mm) behind the leading edge

Prop Size: 10x7 - 11x7

Hardware Included: Yes

Speed Control : 20A Brushless

Recommended Battery: 2100 mAh 3-Cell 11.1V Li-Po

Flaps: Yes (optional)

Control Throw (Ailerons): 1/2 in (15mm) Up/Down Low Rate or 5/8 in (19mm) High Rate

Control Throw (Elevator): 9/16 in (18mm) Up/Down Low Rate or 7/8 in (23mm) High Rate

Control Throw (Rudder): 7/8 in (23mm) Right/Left Low Rate or 1-1/4 in (32mm) High Rate

Approx. Flying Duration: 10-20 minutes

Scale: Park Flyer

Approx. Assembly Time: 1-2 hours

Gear Ratio: 6.5:1 when using Park 400 Brushless Inrunner

Needed to Complete

Brushless Motor
Brushless ESC
4+ Ch Radio
4 Sub-micro Servos
Servo Extensions & Y-harness
4 to 6-Ch Receiver
Li-Po Battery
Li-Po Charger
CA
Propeller

Available Options

Batteries:
Motors:
Receivers:
Servos:
Speed Controls: