SpeedWing's "R/C Flying Hobbies"

Click to Enlarge

Park 480 BL Outrunner Motor, 1020Kv

Key Features

Perfect match for 3D park flyers 20- to 30-ounces (565- to 850-grams)
Ideal for scale park flyers 25- to 35-ounces (710- to 990-grams)
Ideal for models requiring up to 275 watts of power
High Torque, direct drive alternative to inrunner brushless motors
Includes mount, prop adapters, and mounting hardware
Quiet, lightweight operation
External rotor design, 4mm shaft can easily be reversed for alternative motor installations
High quality construction with ball bearings and hardened steel shaft
Slotted 12-pole outrunner design

Overview

The Park 480 Brushless Outrunner motor is designed to deliver clean and quiet power for 3D park flyers 20- to 30-ounces (565- to 850-grams), scale park flyers 25- to 35-ounces (710- to 990-grams), or models requiring up to 275 watts of power. It’s an especially good match for E-flite's Mini Edge 3D ARF (EFL2225) and Mini Funtana 3D ARF (EFL2075), and would provide extreme power for sport park flyers such as the Mini Ultra Stick ARF (EFL2250).

Specifically this 1020 Kv option can handle more current than the 920 Kv version so it is a much better option when match with the Thunder Power Pro-Lite cells.

Specs

Type: Brushless Outrunner

Size: Park Flyer

Bearings or Bushings: Ball Bearings

Wire Gauge: 16

Recommended Prop Range: 10x7 to 12x6

Voltage: 7.2 to 12

RPM/Volt (Kv): 1020

Resistance (Ri): .06 ohms

Idle Current (Io): 1.10A @ 8V

Continuous Current: 22A

Maximum Burst Current: 28A (15 sec)

Cells: 6 - 10 Ni-Cd/Ni-Mh or 2 - 3S Li-Po

Speed Control: 25A to 40A Brushless

Weight: 87g (3.1 oz)

Overall Diameter: 35mm (1.40 in)

Shaft Diameter: 4mm (.16 in)

Overall Length: 33mm (1.30 in)

Needed to Complete

25A - 40A Brushless ESC

2S - 3S Li-Po or 6 - 10 Cell Ni-MH/Ni-CD

10x6 - 12x6 Propeller